VAT 21GX Drive-Up System

VAT 21GX Drive-Up System

The VAT 21GX is a feature-enriched system that can be used for new or retrofit applications to deliver enhanced accessibility and audio/video capabilities.

Additional Information

Diebold VAT 21GX drive-up system

Features & Benefits

DESIGNED TO LAST

  • Modernized appearance enhances the level of sophistication and technology delivered to the customer
  • Remote blowers promote quiet operation during the transport cycle allowing for clear audio communication
  • Retrofitable design offers a convenient refresh solution for your current VAT 21 system
  • Completed more than a quarter of a million round-trip cycles without failure

CUSTOMER-FRIENDLY

  • Optional 15” sunlight-viewable monitor promotes efficiency by providing clear, two-way video communication between the teller and the consumer
  • 816 AudioTM System offers superior two-way, full-duplex communication between teller and consumer
  • Customer terminal features dual-height control CALL/SEND buttons and a raised interface for convenient reach

CONVENIENT CUSTOMER TERMINAL

The VAT 21GX customer terminal features an enhanced ergonomic design that encompasses dual-height CALL/SEND buttons and a raised customer interface. These features improve a customer’s view and reach, and have been designed for all vehicle types. An optional base riser raises the terminal to access the 4.5” carrier for convenient access from SUVs and trucks.

4” REPLACEMENT SYSTEM

The VAT 21GX 4” replacement system has been designed to easily replace competitive systems using existing 4” horizontal tubing in the canopy, including 90° expanded bends. When the VAT 21GX is modified for 4” tubing, the payload is reduced to approximately 2 lbs.

ADAPTS TO NEW OR EXISTING SITES

The small 10.75” (25.4 cm) footprint of the customer terminal allows installation of the system on virtually any new or existing drive-up island. The tubing with compact 20” (50.8 cm) radius bends and dual blowers are installed overhead, eliminating the need for costly excavation and ensuring quiet operation. The wiring can be installed overhead or underground.

Specifications

OPTIONS

  • 15” sunlight-viewable monitor

  • Customer terminal base riser (8”H (20.32 cm))

  • Customer privacy handset

  • Door rail heater kit

LISTINGS AND APPROVALS

  • Classified to UL 345R Safety of information Technology Equipment
  • UL tested to the following standards: UL 114 Office Appliance & Business Equipment; UL 50 Rain Test Specification

CUSTOMER TERMINAL

  • 10.75”W x 10.75”D x 56.94”H (27.3 cm x 27.3 cm x 144.6 cm)
  • Operating temperature: -30˚ F to 130˚ F (-34˚ C to 54˚ C)
  • Humidity: 15% to 100% non-condensing

SINGLE-SIDED OPERATOR UNIT

  • 9”W x 9.43”D x 28.375”H (22.86 cm x 23.97 cm x 72.07 cm)
  • Operating temperature: -5˚ F to 100˚ F (10˚ C to 22.8˚ C)
  • Humidity: 15% to 80% non-condensing

DUAL-SIDED OPERATOR UNIT

  • 7.63”W x 9”D x 29.2”H (19.37 cm x 22.86 cm x 73.98 cm)
  • Operating temperature: -5˚ F to 100˚F (10˚ C to 22.8˚ C)
  • Humidity: 15% to 80% non-condensing

TUBING

Standard 4.5” (11.43 cm) diameter tubing with 20” (50.8 cm) radius bends. Available in PVC and steel.

ELECTRICAL

  • 115VAC, 60Hz; 1 AMP; 220VAC, 50 Hz Installation Features
  • PVC or steel tubing and blowers installed overhead. Wiring may be installed overhead or underground in culvert or direct-buried configuration.

ROHS COMPLIANT

Restriction of Hazardous Substances (RoHS) - compliant in support of an environmentally friendly solution.

Let's Connect

I am interested in Go