Wincor Nixdorf POS USB driver Installation Version 1.6 / June 2018 Driver Version 2.50.0.0 (Windows x86) Driver Version 2.50.0.2 (Windows x64) (c) 1996-2018, Wincor Nixdorf International GmbH GENERAL: ======== Depending on the operating system the installation procedure The Wincor Nixdorf POS USB driver is released for Windows(r) XP(tm), Windows(r) POSReady2009(tm), Windows(r) 7(tm), Windows(r) POSReady 7(tm) and Windows(r) 8.1(tm). The installation can be started from the command line by calling (example): 'WN_POSUSB_Driver-2.50.0.0-44-setup.exe' Appending /silent or /verysilent will start the installation in (very) silent mode. Some important notes are described in chapter 'HINTS'. REQUIREMENTS: ============= - Administrator rights - Application(s) using this driver must be closed before starting this installation or update procedure. The files must be extracted to the destination directory C:\Retail\Hardware\POSusb (if C:\ is the Boot drive) INSTALLATION: ============= The driver must be installed BEFORE CONNECTING any of the supported devices because this driver setup will work properly only if no known USB device like - Wincor Nixdorf POSPrinter - TPG (former Axiohm) POSPrinter - ADS CashDrawer - OMRON MSR and ChipCardReader - Olitronic Keylock - NIDEC SANKYO MSR and ChipCard reader - Wincor Nixdorf special electronic - Wincor Nixdorf Electronic Key Controller (EKC) - Wincor Nixdorf Fiscal Family Controller (FFC) - Crane CoinRecycler CLS200, C1010 is connected and no corresponding driver was installed before. SUPPORTED DEVICES (CURRENT): ============================ Wincor Nixdorf (VID_0AA7): -------------------------- - TH180 thermal receipt printer - TH210 thermal receipt printer - TH220 2 color thermal receipt printer - TH230 2 color thermal receipt printer - TH230+ 2 color thermal receipt printer - TH320 2 color thermal receipt & impact slip printer - TH420 2 color thermal receipt & impact slip printer - TP07 thermal receipt printer - TP07c thermal receipt printer - TP07-2 thermal receipt printer - Central Special Electronics - Electronic Key Controller (EKC) - Fiscal Family Controller (FFC) - Pharmacy Printer - XiPrintPlus thermal Lotto printer - XiScan Lotto scanner Wincor Nixdorf Printers (VID_0DD4): ----------------------------------- - TH23 thermal receipt printer - PP01 thermal receipt printer - PP02 thermal receipt printer TPG Printers (VID_05D9): ------------------------ - A758 thermal receipt & impact slip printer - A760 2 color thermal receipt & impact slip printer - A794 thermal receipt printer - A795 2 color thermal receipt printer ADS (VID_067A): --------------- - CashDrawer OMRON (VID_0590): ----------------- - MSR and ChipCard Reader Olitronic Keylock (VID_0403): ----------------------------- - Keylock WN CHD ICM 330 (VID_077A): -------------------------- - NIDEC SANKYO USB MSR and ChipCard reader Crane (VID_14D4): ----------------- - CoinRecycler CLS200, C1010 Zebra (VID_0A5F): ----------------- - Label Printer GX430t HINTS: ====== - If the driver is installed correctly, you will find in the device manager an "WNPOSUSB controlled devices" entry, everytime if a known USB device is connected. - If OPOS 1.6 is not used, it is strictly recommended to extract the WNPOSUSB files to the Boot Drive's directory C:\Retail\Hardware\POSusb (if C:\ is the Boot drive) Trademarks: All company names and trademarks mentioned in this documentation are the property of their respective owners. CONTENTS: ========= readme.txt This file ... cleanup.exe tool for removing older versions dpinst.exe Driver Package Installation program wnposusb.cat Security Catalog File, contains the signature wnposusb.inf Contains the installation information WNPOSUSB.sys Wincor Nixdorf POS USB driver 32bit wnposusb_x64.cat Security Catalog File, contains the signature wnposusb_x64.inf Contains the installation information WNPOSUSB_x64.sys Wincor Nixdorf POS USB driver 64bit dnvcom.cat Security Catalog File, contains the signatu dnvcom.inf Contains the installation information for virtual COM ports used by the WN Fiscal Family Controller, iCash30 and ED40 Scanner. CHANGE HISTORY: =============== Added ----- DESCRIPTION: - Wincor Nixdorf TH230 printer STATUS: Added with version 09 DESCRIPTION: - OMRON MSR and ChipCardReader integrated STATUS: Added with version 11 DESCRIPTION: - LEXMARK T640 Laser Printer STATUS: Added with version 12 DESCRIPTION: - Support of Microsoft(R) operating system Windows(R) 2003 Server(TM) STATUS: Added with version 13 DESCRIPTION: - Unattended driver installation / update STATUS: Added with version 14 DESCRIPTION: - Olitronic USB Keylock STATUS: Added with version 15 DESCRIPTION: - Hopt+Schuler USB MSR reader STATUS: Added with version 16 DESCRIPTION: - NIDEC SANKYO USB MSR and ChipCard reader STATUS: Added with version 18 DESCRIPTION: - Central Special Electronics - Ask for Windows7 - File driven input for special devices STATUS: Added with version 23 DESCRIPTION: - Copy wnposusb.inf file to INF directory STATUS: Added with version 25 DESCRIPTION: - Wincor Nixdorf TP07-2 printer STATUS: Added with version 27 DESCRIPTION: - Wincor Nixdorf Electronic Key Controller STATUS: Added with version 29 DESCRIPTION: - Wincor Nixdorf Fiscal Family Controller STATUS: Added with version 30 DESCRIPTION: - TH230+ missing in supported devices STATUS: Added with version 31 DESCRIPTION: - Virtual COM port for Wincor Nixdorf Fiscal Family Controller STATUS: Added with version 32 DESCRIPTION: - Crane CoinRecycler CLS200, C1010 STATUS: Added with version 32 DESCRIPTION: - Pharmacy Printer STATUS: Added with version 37 DESCRIPTION: - TH180, TH250, XiPrintPlus, XiScan, Zebra Gx430t STATUS: Added with version 38 DESCRIPTION: - Windows 8.1 Support STATUS: Added with version 38 DESCRIPTION: - Wincor Nixdorf PP01 and PP02 STATUS: Added with version 39 DESCRIPTION: - dnvcom.inf and dnvcom.cat added virtual COM port support for FFC, iCash30 and ED40 Scanner STATUS: Added with version 44 Changed ------- DESCRIPTION: - Batch file reworked for 'silent' device detection STATUS: Changed with version 08 DESCRIPTION: - XiPrint and XiPrintPlus deactivated STATUS: Changed with version 11 DESCRIPTION: - Search for VID and PIDs instead of VID and device description names STATUS: Changed with version 15 DESCRIPTION: - Lexmark T640 printer deactivated STATUS: Changed with version 17 DESCRIPTION: - Rebuilt of the installation procedure - No further support for the Update driver's procedure (if necessary the driver must be updated manually). STATUS: Changed with version 19 DESCRIPTION: - Batch file changed from 'device' to 'class' install - Uninstall registry entry changed STATUS: Changed with version 20 DESCRIPTION: - Complete redesign of the batch file STATUS: Changed with version 21 DESCRIPTION: - Rework of Batch file: Driver installation - some minor adaptations - wnposusb driver removal batch file created (wnremove.bat) STATUS: Changed with version 22 DESCRIPTION: - Hopt+Schuler deactivated STATUS: Changed with version 23 DESCRIPTION: - Installation adapted to work if wnposusb.inf file exists in the INF directory STATUS: Changed with version 24 DESCRIPTION: - Additional the infcache.1 file will be deleted before running the wnposusb driver installation STATUS: Changed with version 25 DESCRIPTION: - Ask if 'find' and 'sort' exists - Abort on unsupported OS (like Win9x, Win7) STATUS: Changed with version 27 DESCRIPTION: - Beep eleminated STATUS: Changed with version 28 DESCRIPTION: - TH250 removed from inf file STATUS: Changed with version 40 DESCRIPTION: - Suppress installation on Windows 10 STATUS: Changed with version 41 DESCRIPTION: - one combined readme.txt STATUS: Changed with version 44 Corrected --------- DESCRIPTION: - Due to language dependencies, sometimes the update procedure didn't work properly, especially if a device was connected before the WNPOSUSB driver's installation STATUS: Corrected with version 15 DESCRIPTION: - In case version 38 and / or 39 was installed on the system and was updated by version 40 and / or 41 the TH250 is still used by the wnposubs driver instead of usbprint.sys reason is that when updating version inf and driver files will remain and will be used. A cleanup mechanism needs to be implemented in order to remove older version. - usbprint.inf was removed in a couple of preinstallations but is now needed for TH250 STATUS: Corrected with version 42 DESCRIPTION: - Cleanup tool was not compiled for XP, driver package installation failes on XP and POSReady2009 STATUS: Corrected with version 43 Current Version: 2.50.0.0-44